Author Index - A


A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

A. Kader, Slimani

Theoretical Study: Flow Control Mono and Bi-Stable Fluidic Device for Micro-Injection System [FEDSM/ICNMM2010‑30088]

Abbasi, Hossein Reza

Simulation of Heat Transfer in Nanoscale Flow Using Molecular Dynamics [FEDSM/ICNMM2010‑31065]

A Molecular Dynamics Study of Fluids Through Slit-Like Nanochannels Using Two Different Driving Systems [FEDSM/ICNMM2010‑31066]

Abbasian Shirazi, Ashkan

Numerical Analysis of Entropy Generation in Array of Pin-Fin Heat Sinks for Some Different Geometries [FEDSM/ICNMM2010‑30011]

Abboud, Jack E.

The Jettting Behavior From Single Laser Induced Bubbles Generated Above a Solid Boundary With a Through Hole [FEDSM/ICNMM2010‑30658]

Abdel Latif, Mohammed A.

Magnus-Effect Rotors for Solar Chimney Power Plants [FEDSM/ICNMM2010‑31064]

Abdel-Raouf, Emad

Computational Investigation of Low Reynolds Number Impulsively Started Annular Jets [FEDSM/ICNMM2010‑30767]

Abdel-Salam, Tarek

Flowfield Analysis in T-Junction Microchannel With Bubble Formations [FEDSM/ICNMM2010‑30786]

Abderrahim, Ben Richou Abderrahim

Kinematics of a Free Particle Moving Between Two Parallel Walls [FEDSM/ICNMM2010‑30502]

Abdou, Ashraf

Creating Small Gas Bubbles in Flowing Mercury Using Turbulence at an Orifice [FEDSM/ICNMM2010‑30134]

Abolhasani, Milad

Nonlinear Localization for Electrowetting-Based Digital Microfluidic Actuation [FEDSM/ICNMM2010‑30222]

Abouali, O.

Numerical Investigation of the Flow Field Around a Low Rise Building Using LES Technique [FEDSM/ICNMM2010‑30739]

Large Eddy Simulation of Turbulent Air Flow Over a Surface Mounted Hemisphere [FEDSM/ICNMM2010‑30742]

Abouali, Omid

Numerical Investigation of Heat Transfer Enhancement in a Microchannel With Offset Micro Pin-Fins [FEDSM/ICNMM2010‑30647]

Lattice Boltzmann Simulation of Gaseous Flow in Microchannel With Rectangular Grooves [FEDSM/ICNMM2010‑30652]

Micro Fibers Motion in a Laminar Flow in a Microchannel [FEDSM/ICNMM2010‑30653]

A Numerical Investigation for Nano-Particles Deposition in Realistic Geometry of Deviant Human Nasal Airways [FEDSM/ICNMM2010‑30661]

Abraham, Santosh

Experimental and Numerical Investigations of a Transonic, High Turning Turbine Cascade With a Divergent Endwall [FEDSM/ICNMM2010‑30393]

Acar, H. Yagci

Magnetic Actuation of Nanofluids With Ferromagnetic Particles [FEDSM/ICNMM2010‑30728]

Adobes, André

Computation of Fluid Forces Acting on an Infinite Cylinder Submitted to a Single Phase Cross Flow [FEDSM/ICNMM2010‑30016]

Adrian, R.

Photothermal Energy Conversion in Liquid Nanoparticle Suspensions [FEDSM/ICNMM2010‑30172]

Afanasjevska, V. E.

Application of Stochastic Optimization Methods in the Gas Turbine Projection Problems [FEDSM/ICNMM2010‑30641]

Afferrante, Luciano

Fluid Mechanics of Deformable Aortic Prostheses [FEDSM/ICNMM2010‑31148]

Afshar, Yaser

Simulation of Dripping Using Dissipative Particle Dynamics [FEDSM/ICNMM2010‑31073]

Dissipative Particle Dynamics Simulation of Nano Taylor Cone [FEDSM/ICNMM2010‑31089]

Afteni, Mitica

Prediction of the Stress-Strain Response of the Ultrafine-Grained Nickel Using Multi-Scale Analysis [FEDSM/ICNMM2010‑30871]

Ahmadi, Ali

Numerical Multiphysics Modeling of Microdroplet Motion Dynamics in Digital Microfluidic Systems [FEDSM/ICNMM2010‑30754]

Ahmadi, G.

Fiber Transport and Deposition in Human Upper Tracheobronchial Airways [FEDSM/ICNMM2010‑30601]

Ahmadi, Goodarz

Numerical Simulations on Gas-Liquid-Particle Three-Phase Flows Under Microgravity [FEDSM/ICNMM2010‑30068]

Electrostatic and Capillary Effects on the Detachment of Particles With Surface Deformation in Turbulent Flows [FEDSM/ICNMM2010‑30069]

Heat Flux to Fluids Within a Rock Fracture in a Geothermal System [FEDSM/ICNMM2010‑30213]

Measurement of Interfacial Area Production and Permeability Within Porous Media [FEDSM/ICNMM2010‑30214]

Effect of Air Flow on Dust Particles Resuspension From Common Flooring [FEDSM/ICNMM2010‑30596]

Sequence of Courses on Particle Transport, Deposition and Removal and Engineering of Nano/Micro-Scale Systems [FEDSM/ICNMM2010‑30600]

A Numerical Investigation for Nano-Particles Deposition in Realistic Geometry of Deviant Human Nasal Airways [FEDSM/ICNMM2010‑30661]

Computer Simulations of Airflow Field Around a Cube: Comparisons of LES and RANS Models [FEDSM/ICNMM2010‑30768]

Turbulent Two-Phase Flows and Particle Deposition in a Duct at High Concentrations [FEDSM/ICNMM2010‑30828]

Ahmed, Moinuddin

Flow of a Thin Viscoelastic Jet [FEDSM/ICNMM2010‑30505]

Ahmed, Saad A.

Predictions of Turbulence Intensity in a Combustor Model Using Neural Network Analysis [FEDSM/ICNMM2010‑30834]

Ahn, Ho Seon

Experimental Study of Nucleate Boiling Performance on Several Types of the Mixed-Wettability Pattern Surface by Micro/Milli-Sized Hydrophobic Patterns [FEDSM/ICNMM2010‑30428]

Aida, Hiroshi

DNS of Turbulent Spot Developing Into Turbulent Stripe in Plane Poiseuille Flow [FEDSM/ICNMM2010‑30956]

Akasaka, Kei

Development of Rapid Simulation Method for Automotive Aerodynamics [FEDSM/ICNMM2010‑30625]

Akbari, M.

Optothermal Control of Local Fluid Temperature in Microfluidics [FEDSM/ICNMM2010‑30412]

Analytical and Experimental Characterization of Flow in Slowly-Varying Cross-Section Microchannels [FEDSM/ICNMM2010‑30417]

Akbari, M. H.

Parametric Study of an Autothermal Micro Surface Reactor for Hydrogen Production [FEDSM/ICNMM2010‑30010]

Numerical Simulation of a Mini-Channel Three-Way Catalytic Converter [FEDSM/ICNMM2010‑30239]

Modeling of a Micro-Channel Water-Gas Shift Reactor [FEDSM/ICNMM2010‑30241]

Akbari, Nozar

The Histogram of Pressure Oscillations Amplitudes, in Lean Premixed Combustions, Caused by Thermo-Acoustic Instabilities [FEDSM/ICNMM2010‑31102]

Akbari, Soheil

Analytical Design of Helically Coiled Heat Exchangers Used for Transient Heat Transfer Applications [FEDSM/ICNMM2010‑30231]

Calibration of Triple-Wire Probes Using an Artificial Neural Network [FEDSM/ICNMM2010‑31198]

Akhatov, Iskander S.

Experimental Characterization of Aerosol Flow Through a Micro-Capillary [FEDSM/ICNMM2010‑30794]

Liquid Deposition at Micro and Nanoscale [FEDSM/ICNMM2010‑30801]

Akhgar, Alireza

Simulation of Long Microchannel Flow in Transitional Regime Using Lattice Boltzmann Method [FEDSM/ICNMM2010‑30316]

Akhlaghi, H.

Numerical Simulation of Confined Nano-Impinging Jet in Microscale Cooling Application Using DSMC Method [FEDSM/ICNMM2010‑31098]

Akhlaghi, Hassan

Gas Properties Effects in Microchannel Studies Using Direct Simulation Monte Carlo [FEDSM/ICNMM2010‑31022]

Al-Dini, Salem

Design of Volumetric Solar Flow Receivers [FEDSM/ICNMM2010‑31001]

Al-Dini, Salem A.

Heat Transfer Enhancement in Microchannel Flow: Presence of Microparticles in a Fluid [FEDSM/ICNMM2010‑30921]

Al-Halhouli, Ala’aldeen

Numerical Analysis of Mixing in a Multifunction Electromagnetic Micropump [FEDSM/ICNMM2010‑30971]

Alajbegovic, Ales

Nozzle Effects in Thermal Wind Tunnels [FEDSM/ICNMM2010‑31171]

Ali, Ahmed M. S.

Three Dimensional Simulation of Suspension Flow in a Mold Cavity [FEDSM/ICNMM2010‑30355]

Ali, Rashid

A Visualization Study During Flow Boiling of R134a in a Horizontal Microchannel [FEDSM/ICNMM2010‑30218]

Two Phase Heat Transfer of Ammonia in a Mini/Micro Channel [FEDSM/ICNMM2010‑30302]

Two Phase Pressure Drop of Ammonia in a Mini/Micro-Channel [FEDSM/ICNMM2010‑31021]

Aliasghar Zadeh, Shobeir

Numerical Study on Droplet Formation in a Microchannel T-Junction Using the VOF Method [FEDSM/ICNMM2010‑30191]

Alighanbari, H.

A Fluid Dynamics Study of a Modified Low-Reynolds-Number Flapping Motion [FEDSM/ICNMM2010‑30379]

Analytical and Numerical Study of a Swirling Submerged Jet Flow [FEDSM/ICNMM2010‑30777]

Experimental and Numerical Study of a Pitching Blade [FEDSM/ICNMM2010‑31104]

Alkandry, Hind

Interaction Between Two Opposing Turbulant Round Jets [FEDSM/ICNMM2010‑30894]

Allen, Jeffrey S.

Implications of Contact Line Dynamics on Taylor Bubble Flow Morphology [FEDSM/ICNMM2010‑30911]

Allen, John S.

Influence of Surfactants on Bubble Entrainment [FEDSM/ICNMM2010‑31258]

Almutairi, Zeyad

Improving the Electrokinetic Properties of PDMS With Surface Treatments [FEDSM/ICNMM2010‑31241]

Effects of Hydrophobic Recovery of Plasma Treated PDMS Microchannels on Surface Tension Driven Flow [FEDSM/ICNMM2010‑31243]

Aloui, Fethi

Experimental Investigations of Transfer Phenomena in a Confined Plane Turbulent Impinging Water Jet [FEDSM/ICNMM2010‑30719]

Inverse Method Used for the Determination of the Wall Shear Stress in a Sliding Rheometer Using Sandwich Probes [FEDSM/ICNMM2010‑30760]

Numerical Investigations of Passive Scalar Transport in Turbulent Taylor-Couette Flows: Code Validation [FEDSM/ICNMM2010‑31296]

Alquaity, Awad B. S.

Heat Transfer Enhancement in Microchannel Flow: Presence of Microparticles in a Fluid [FEDSM/ICNMM2010‑30921]

Alvi, F.

Active Flow Control of the 3D Separation on a Ahmed Body Using Steady Microjet Arrays [FEDSM/ICNMM2010‑30491]

Aly, Kareem

Numerical Simulation of Internal Cavities Acoustic Trapped Modes With Mean Flow [FEDSM/ICNMM2010‑30333]

Amabili, M.

On the Feasibility of Using Linear Fluid Dynamics in an Overall Nonlinear Model for the Dynamics of Cantilevered Cylinders in Axial Flow [FEDSM/ICNMM2010‑30082]

Two-Dimensional Shell Vibration of Microtubule in Living Cell [FEDSM/ICNMM2010‑30636]

Sloshing in a Vertical Circular Cylindrical Container With an Vertical Baffle [FEDSM/ICNMM2010‑31120]

Amabili, Marco

Phase-Shift Determination in Coriolis Flowmeters With Added Masses [FEDSM/ICNMM2010‑30085]

Buckling of Human Aorta Related to Dissection due to Flow-Pressure Conditions [FEDSM/ICNMM2010‑30812]

Hyperchaotic Behaviour of Shells Subjected to Flow and External Force [FEDSM/ICNMM2010‑30814]

Amandolèse, Xavier

Vortex Induced Vibrations of a Square Cylinder in a Wind Tunnel [FEDSM/ICNMM2010‑30067]

Ambari, Abdelhak

Kinematics of a Free Particle Moving Between Two Parallel Walls [FEDSM/ICNMM2010‑30502]

Consequences of the Confinement on the Mass or Heat Transfer on a Spherical Particle in Non-Newtonian Fluids [FEDSM/ICNMM2010‑30506]

Yield Stress Fluid Method to Measure the Pore Size Distribution of a Porous Medium [FEDSM/ICNMM2010‑30509]

Ameel, Tim

Moderate Reynolds Number Mixing in a T-Channel [FEDSM/ICNMM2010‑30159]

Model Development for Fluid Structure Interaction in the Slip Regime [FEDSM/ICNMM2010‑31277]

Amin, Rizwana

Flow of Moving Wall Jet Near Channel Exit at Moderate Reynolds Number [FEDSM/ICNMM2010‑30769]

Amini, Ghobad

Capillary Instability of Liquid Jets Issuing From Elliptic Nozzles [FEDSM/ICNMM2010‑30549]

Amiralaei, M.

Analytical and Numerical Study of a Swirling Submerged Jet Flow [FEDSM/ICNMM2010‑30777]

Amiralaei, M. R.

A Fluid Dynamics Study of a Modified Low-Reynolds-Number Flapping Motion [FEDSM/ICNMM2010‑30379]

Experimental and Numerical Study of a Pitching Blade [FEDSM/ICNMM2010‑31104]

Amirfazli, Alidad

A Finite Element Model for Predicting the Collapse of Two-Line and L-Shaped Patterns During Drying Process in Photolithography [FEDSM/ICNMM2010‑30070]

Amiri-Jaghargh, Ali

Cooling in Constant Wall Temperature Microchannels With Thermal Creep Effects [FEDSM/ICNMM2010‑30770]

Anami, Keiko

Coupled-Mode Dynamic Instability of Tainter Gates With Parallel Bending Vibration of the Skinplate [FEDSM/ICNMM2010‑30400]

Anbarsooz, Morteza

Blade Curve Influences on Performance of Savonius Rotors: Experimental and Numerical [FEDSM/ICNMM2010‑30919]

Andisheh Tadbir, M.

Parametric Study of an Autothermal Micro Surface Reactor for Hydrogen Production [FEDSM/ICNMM2010‑30010]

Ando, H.

Experimental Analysis of Non-Uniform Surface Roughness Affecting to Flow Resistance [FEDSM/ICNMM2010‑31038]

Andrews, Malcolm J.

On the “Early-Time” Evolution of Variables Relevant to Turbulence Models for the Rayleigh-Taylor Instability [FEDSM/ICNMM2010‑30556]

Angeli, Panagiota

Bubble Formation on Top of Submerged Needle and Substrate Plates [FEDSM/ICNMM2010‑30551]

Antunes, Jose

Vibro-Impact Experiments and Computations of a Gap-Supported Tube Subjected to Single-Phase and Two-Phase Fluid-Elastic Coupling Forces [FEDSM/ICNMM2010‑30071]

Flow Conditions at the Inlet of Aspirating Pipes: Part 2—Experiments [FEDSM/ICNMM2010‑30075]

Anurjew, Eugen

Microstructure Devices for Water Evaporation [FEDSM/ICNMM2010‑30700]

Anzai, Hitomi

The Effect of 3D Visualization on Optimal Design for Strut Position of Intracranial Stent [FEDSM/ICNMM2010‑30591]

Aoshima, Daisuke

Wind Tunnel Experiments on How a Porous Fence Affects Flow and Erosion on Sand Dune [FEDSM/ICNMM2010‑30957]

Apte, Sourabh V.

Numerical Modeling of a Mini/Microchannel Reactor for Methane-Steam Reforming [FEDSM/ICNMM2010‑31192]

Argüelles Díaz, Katia María

A Numerical 3-D Model of a Trapezoidal Three-Hole Pneumatic Pressure Probe for Incompressible Flow [FEDSM/ICNMM2010‑30713]

Arndt, Roger E. A.

Investigation of the Behaviour of Ventilated Supercavities [FEDSM/ICNMM2010‑30984]

Arshad, Azim

Study on Modeling Method of Vortex Shedding Synchronization in Heat Exchanger Tube Bundles [FEDSM/ICNMM2010‑30917]

Arthurs, David

Self-Sustained Oscillations of High Speed Impinging Planar Jets [FEDSM/ICNMM2010‑30215]

Arzoumanian, Sevag

Fluid Structure Interaction With Mean Flow: Over-Scattering and Unstable Resonance Growth [FEDSM/ICNMM2010‑31170]

Asaee, S. A.

Numerical Simulation of a Mini-Channel Three-Way Catalytic Converter [FEDSM/ICNMM2010‑30239]

Modeling of a Micro-Channel Water-Gas Shift Reactor [FEDSM/ICNMM2010‑30241]

Asako, Yutaka

Flow Structure of Supersonic Jet From a Straight Micro-Tube [FEDSM/ICNMM2010‑30622]

Asano, Yukako

Prediction of Chemical Reaction Yield in a Microreactor and Development of a Pilot Plant Using the Numbering-Up of Microreactors [FEDSM/ICNMM2010‑30532]

Askari, E.

Sloshing in a Vertical Circular Cylindrical Container With an Vertical Baffle [FEDSM/ICNMM2010‑31120]

Asma, Abdenbi

Theoretical Study: Flow Control Mono and Bi-Stable Fluidic Device for Micro-Injection System [FEDSM/ICNMM2010‑30088]

Assi, Gustavo R. S.

Wake Induced Vibration of a Pair of Circular Cylinders and Its Dependency on Reynolds Number [FEDSM/ICNMM2010‑31278]

Astolfi, Jacques André

An Experimental Study of Boundary-Layer Transition Induced Vibrations on a Hydrofoil [FEDSM/ICNMM2010‑30755]

Atieh, Muataz

Carbon-Based Electric Double Layer Capacitors for Water Desalination [FEDSM/ICNMM2010‑30696]

Attar, Peter J.

A Characterization of Limit Cycle Oscillations in Membrane Wing Micro Air Vehicles at Low Angle of Attack [FEDSM/ICNMM2010‑30674]

Attig, Hans

New Lab-on-a-Chip System for Infectious Disease Analysis [FEDSM/ICNMM2010‑31048]

Attinger, Daniel

Injection, Transport and Removal of Gas Bubbles in Microchannels for Heat Transfer Enhancement [FEDSM/ICNMM2010‑30161]

Microfluidic Formation of Hydrogel Microparticles for Drug Delivery [FEDSM/ICNMM2010‑30717]

Embedded Refractive Index Sensing in Microchannels Using Multiplexed Silicon-on-Insulator Microring Resonators [FEDSM/ICNMM2010‑30824]

Characterization of Switching Time and Cell Stress in a Gravity-Driven Microfluidic Cell Sorter Based on Hydrodynamic Switching [FEDSM/ICNMM2010‑30977]

Aubrun, S.

Active Flow Control of the 3D Separation on a Ahmed Body Using Steady Microjet Arrays [FEDSM/ICNMM2010‑30491]

Aubrun, Sandrine

Experimental Characterization of the Unsteady Flow Over the Rear Slant of an Ahmed Body [FEDSM/ICNMM2010‑30633]

Aubry, Nadine

Modeling of Blood Flow in the Human Brain [FEDSM/ICNMM2010‑30554]

Ausoni, Philippe

Experimental Investigation of the Vortex Shedding Dynamic in the Wake of Oblique and Blunt Trailing Edge Hydrofoils Using PIV-POD Method [FEDSM/ICNMM2010‑30758]

Avellan, Francois

Advanced Instrumentation for Measuring Fluid-Structure Coupling Phenomena in the Guide Vanes Cascade of a Pump-Turbine Scale Model [FEDSM/ICNMM2010‑30693]

Avellan, François

Experimental Investigation of the Vortex Shedding Dynamic in the Wake of Oblique and Blunt Trailing Edge Hydrofoils Using PIV-POD Method [FEDSM/ICNMM2010‑30758]

Avila, Carlos

Characterization of Oil-Water Dispersions/Emulsions Flowing Through Restrictions [FEDSM/ICNMM2010‑31002]

Awad, M. M.

Review and Modeling of Two-Phase Frictional Pressure Gradient at Microgravity Conditions [FEDSM/ICNMM2010‑30876]

Axisa, François

Flow Conditions at the Inlet of Aspirating Pipes: Part 1—Theory [FEDSM/ICNMM2010‑30074]

Flow Conditions at the Inlet of Aspirating Pipes: Part 2—Experiments [FEDSM/ICNMM2010‑30075]

Aydin, Ismail

Modeling of Newtonian Fluids in Annular Geometries With Inner Pipe Rotation [FEDSM/ICNMM2010‑31176]

Azad, Md. Abul Kalam

Flow of Wall Jet Near Channel Exit at Moderate Reynolds Number [FEDSM/ICNMM2010‑30744]

Azarbadegan, A.

Optimization of Diffuser/Nozzle Dlements for Rectification Valveless Micropumps [FEDSM/ICNMM2010‑30856]

Azarbadegan, Alireza

Analysis and Optimization of a Passive Micromixer With Curved-Shaped Baffles for Efficient Mixing With Low Pressure Loss in Continuous Flow [FEDSM/ICNMM2010‑31245]

Characterization and Optimization of a Three-Dimensional T-Type Micromixer for Convective Mixing Enhancement With Reduced Pressure Loss [FEDSM/ICNMM2010‑31257]

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z