Keynote Speakers
[Markus Braun] [Mark Davis] [Djamel Lakehal] [Rajat Mittal] [Martin Sommerfeld] [Ken Williams]

Mini Symposia
[Bio-Engineering] [Gas-Solid Flows]

Contributed Papers
[Aluminium and Alumina] [Casting and Solidification] [CFD-DEM] [Combined Modelling Approaches] [Combustion] [Drop Breakup/Coalescence] [Emerging Science] [Fluidised Beds] [Gas Flows] [Granular Flow] [Granulation and Atomisation] [Heap Leaching] [Heat Transfer] [Hydrometallurgy] [Industrial Applications] [Lattice-Boltzmann] [Liquid-Particle Flows] [Micro-fluidic, Bubble & Drops] [Numerical Methods] [Optimisation & Performance] [Particle Collisions] [Population Balance] [Pyrometallurgy] [Subsea] [Thickeners] [Turbulence and Multi-material flows]

Keynote Lectures

Title Authors
FROM SINGLE PARTICLE TRACKING TO MASSIVELY PARALLEL MULTIPHASE FLOW SIMULATION Braun, M. (ANSYS Germany GmbH)
CFD MODELLING IN THE DEVELOPMENT AND SCALE-UP OF THE HISMELT PROCESS Davis, M.P. and Dry, R.J. (HIsmelt Corporation)
LARGE-SCALE SIMULATION OF BUBBLE PLUMES AND SUBSEA HYDROCARBON BLOWOUT JETS Lakehal, D. (ASCOMP GmbH, SWITZERLAND)
CARDIAC FLUID DYNAMICS: FROM COMPUTATIONAL MODELS AND FLOW PHYSICS TO DIAGNOSIS AND SURGICAL INTERVENTION Mittal, R. (Johns Hopkins Uni., USA)
ANALYSIS OF DILUTE PHASE PNEUMATIC CONVEYING THROUGH PIPE SYSTEMS BY THE EULER/LAGRANGE APPROACH Sommerfeld, M. and Lain, S. (Martin-Luther University, Halle-Wittenberg, GERMANY)
PREDICTING UNEXPECTED BEHAVIOUR IN INDUSTRIAL DEEP-BED FLUIDIZATION REACTORS AND DEVELOPING ENGINEERED SOLUTIONS WITH CFD Williams, K.A. and Thibault, S. (CPFD Software, USA)
Back to Top

Mini-Symposia - Bio-Engineering

Title Authors
FLUID FLOW AND STRESSES ON MICROCARRIERS IN SPINNER FLASK BIOREACTORS Liovic, P., Sutalo, I.D., Stewart, R.L., Glattauer, V. and Meagher, L. (CSIRO CMIS)
INVESTIGATING ARTERIAL GEOMETRY RISK FACTORS FOR CAROTID ARTHEROSCLEROTIC DISEASE Sinnott, M.D., Harrison, S.M., Phan, T., Beare, R., Srikanth, V. and Cleary, P.W. (CSIRO CMIS)
NUMERICAL INVESTIGATION OF PARTICLE INHALATION FROM AMBIENT ENVIRONMENT AND DEPOSITION IN HUMAN NASAL CAVITY USING AN INTEGRATED MANIKIN MODEL Li, X.D., Ge, Q.J. and Tu, J.Y. (RMIT University)
SIMULATION OF FLOW IN A HELICAL DEVICE USED FOR IRRADIATING BIOLOGICAL FLUIDS Prakash, M., Nikolof, T., Cleary, P.W. and Bertolini, J. (CSIRO CMIS)
THREE- DIMENSIONAL NUMERICAL SIMULATION OF BLOOD FLOW IN MOUSE AORTIC ARCH AROUND ATHEROSCLEROTIC PLAQUES Assemat, P., Hough, J., Siu, K.K., Armitage, J.A., Contreras, K.G., Aprico, A., Andrews, K., Dart, A., Chin-Dusting, J. and Hourigan, K. (Monash University)
Back to Top

Mini-Symposia - Gas-Solid Flows

Title Authors
A FILTERED FRICTIONAL-KINETIC MODEL FOR GAS-SOLID FLUIDIZED AND MOVING BEDS Schneiderbauer, S., Schellander, D. and Pirker, S. (Johannes Kepler University, Austria)
AN ASSESSMENT OF MECHANISTIC BREAKAGE AND COALESCENCE KERNELS IN POLY-DISPERSED MULTIPHASE FLOW Deju, L., Cheung, S.C.P., Yeoh, G.H. and Tu, J.Y. (RMIT University)
APPLICATION OF MULTI-SCALE APPROACH IN THE GAS FLOW SIMULATION THROUGH ELECTROSTATIC PRECIPITATORS Guo, B.Y., Ye, X.L., Liu, D.D. and Yu, A.B. (UNSW)
CFD MODELLING OF THE AERODYNAMICS IN A SOLAR - ENHANCED VORTEX GASIFIER (SVG) - PART II. A PRELIMINARY STUDY OF THE LOCATIONS OF SEAL GAS INLETS Yu, J., Cao, Y., Tian, Z.F., Xue, Y. and Nathan, G.J. (The University of Adelaide)
CFD MODELLING OF THE AERODYNAMICS IN A SOLAR-ENHANCED VORTEX GASIFIER (SVG) - PART1. VALIDATION CASE Cao, Y., Tian, Z.F. and Nathan, G.J. (The University of Adelaide)
CFD-DEM INVESTIGATION OF PARTICLE SEPARATIONS USING A TRAPEZOIDAL JIGGING PROFILE Viduka, S., Feng, Y.Q., Hapgood, K. and Schwarz, M.P. (Monash University)
CFD-DEM STUDY OF THE GAS-SOLIDS FLOWS IN A FLUIDIZED BED WITH AN IMMERSED CYLINDER: COMPARISON OF PSEUDO-2D AND 3D MODELS Wahyudi, H., Chu, K.W. and Yu, A.B. (UNSW)
COMPARISON OF RESOLVED AND COARSE GRAIN DEM MODELS FOR GAS FLOW THROUGH PARTICLE BEDS Hilton, J.E. and Cleary, P.W. (CSIRO CMIS)
EFFECT OF ELECTROHYDRODYNAMIC SECONDARY FLOW ON THE PARTICLE COLLECTION IN A WIRE-PLATE ELECTROSTATIC PRECIPITATOR Xing, M., Guo, B.Y. and Yu, A.B. (UNSW)
EFFECTS OF MICROSCOPIC DRAG CORRELATIONS AND RESTITUTION COEFFICIENT ON THE CHARACTERISTICS OF MESO-SCALE CLUSTERING STRUCTURES IN RISER FLOWS Zhou, Q. and Wang, J. (Institute of Process Engineering, Chinese Academy of Sciences)
GAS-POWDER FLOW SIMULATION IN AN ESP UNIT WITHOUT ELECTRIC FIELD Guo, B.Y., Yu, A.B., Li, L.F. and Ye, X.L. (UNSW)
INVESTIGATION OF DROPLET EVAPORATION IN A BUBBLING FLUIDIZED BED
Animation CFD acetone vapour mass fraction
Animation Schlieren image acetone evap
 Mitra, S., Sathe, M.J., Doroodchi, E. and Evans, G.M. (University of Newcastle, Australia)
METHODOLOGY FOR CFD-DEM MODELLING OF PARTICULATE SUSPENSION RHEOLOGY Smuts, E.M., Deglon, D.A. and Meyer, C.J. (University of Cape Town)
NUMERICAL ANALYSIS OF THE INTERACTION OF PARTICLE FLOWS WITH THE VORTEX DYNAMICS IN A DOUBLE EXPANSION Love, A., Giddings, D. and Power, H. (University of Nottingham)
PREDICTING SURFACE PROFILE EVOLUTION CAUSED BY SOLID PARTICLE EROSION Solnordal, C.B. and Wong, C.Y. (CSIRO CMIS)
SIMULATION OF SORPTION ENHANCED STEAM METHANE REFORMING AND CHEMICAL LOOPING REFORMING IN A CIRCULATING FLUIDIZED BED REACTOR Sanchez, R.A. and Jakobsen, H.A. (Norwegian University of Science and Technology)
SIMULATION STUDY ON THE HYDRODYNAMIC CHARACTERISTICS OF MEMBRANE-ASSISTED MICRO-FLUIDIZED BEDS Tan, L. and van Sint Annaland, M. (Eindhoven University of technology )
UPWARD JET PENETRATION IN FLUIDIZED BEDS : CFD PREDICTIONS COMPARED TO EXPERIMENTAL RESULTS Plais, C. (IFPEN)
USING CFD TO SIMULATE HEAT TRANSFER IN PARTICLE CURTAINS Afshar, S. and Sheehan, M. (James Cook University)
Back to Top

Aluminium and Alumina

Title Authors
DYNAMIC FLOW MODELLING IN PRECIPITATOR VESSELS - A COMPARATIVE STUDY OF TURBULENCE MODELLING APPROACHES Brown, G.J., Whyte, D.S. and Fletcher, D.F. (Alcoa World Alumina)
MODELLING BUBBLE FLOW WITH CFX AND FLUENT FOR ALUMINIUM REDUCTION CELLS Witt, P.J., Feng, Y.Q., Eick, I. and Schwarz, M.P. (CSIRO CMIS)
NUMERICAL INVESTIGATION OF BUBBLE INDUCED ELECTRICAL RESISTANCE IN ALUMINIUM REDUCTION CELLS Zhang, K.Y., Feng, Y.Q., Witt, P.J., Yang, W., Cooksey, M., Wang, Z. and Schwarz, M.P. (CSIRO CMIS)
Back to Top

Casting and Solidification

Title Authors
CFD MODELLING OF MACRO-SEGREGATION AND SHRINKAGE IN LARGE DIAMETER STEEL ROLL CASTINGS: A COMPARISON OF SEN AND DLP TECHNIQUES Nastac, L. and Marsden, K. (The University of Alabama)
EXPERIMENTAL VALIDATION AND INDUSTRIAL APPLICATION OF A NOVEL NUMERICAL MODEL FOR CONTINUOUS CASTING OF STEEL Ramirez Lopez, P.E., Bjorkvall, J., Sjostrom, U., Lee, P.D., Mills, K.C., Jonsson, B., Janis, J., Petajajarvi , M. and Pirinen, J. (Swerea MEFOS AB)
Back to Top

CFD-DEM

Title Authors
CFD-DEM STUDY OF THE MULTIPHASE FLOW IN A DENSE MEDIUM CYCLONE: PREDICTION OF WEAR Chu, K.W., Kuang, S.B., Yu, A.B. and Vince, A. (UNSW)
COUPLED DEM-CFD APPROACH TO MODELLING NON-SPHERICAL PARTICLE SEDIMENTATION IN 3D Delaney, G.W., Hilton, J.E., Cleary, P.W. and Miller, C. (CSIRO CMIS)
PARALLEL OPEN SOURCE CFD-DEM FOR RESOLVED PARTICLE-FLUID INTERACTION
Animation 1
Animation 2
 Hager, A., Kloss, C., Pirker, S. and Goniva, C. (Johannes Kepler University Linz)
VALIDATION OF AN EFFICIENT CFD-DEM MODEL FOR LARGE SCALE FLUIDIZED BEDS Braun, M., Srinivasa, M. and Gohel, S. (ANSYS, GERMANY)
Back to Top

Combined Modelling Approaches

Title Authors
MULTI-SCALE MODELLING OF HIGH PRESSURE GAS FAN QUENCHING FOR GAS TURBINE APPLICATIONS Cosentino, F., Gebelin, J.C., Warnken, N. and Reed, R.C. (University of Birmingham)
NUMERICAL MODELLING OF LANDSLIDE EVENTS USING A COMBINATION OF CONTINUUM AND DISCRETE METHODS Lemiate, V.L., Mead, S.R. and Cleary, P.W. (CSIRO CMIS)
Back to Top

Combustion

Title Authors
CFD MODELING OF THE OXY-FUEL COMBUSTION OF VICTORIAN BROWN COAL IN DROP TUBE FURNACE AND 3MW PILOT SCALE BOILER Zhang, J.Z., Prationo, W.P., Zhang, L.Z. and Zhang, Z.Z. (Monash University)
COMPUTATIONAL FLUID DYNAMICS MODELLING OF CHEMISTRY REACTION SCHEMES IN A LAB-SCALE OXY-FUEL FURNACE Al-Abbas, A.H., Naser, J. and Blicblau, A. (Commission of Technical Education, IRAQ)
EFFECT OF AN EXTERNAL FLOW ON COMBUSTION IN A TRAPPED-VORTEX BURNER Christo, F.C., Nathan, G.J. and Kelso, R.M. (University of South Australia)
CFD INVESTIGATION OF GOAF FLOW OF METHANE RELEASED FROM UNMINED ADJACENT COAL SEAMS Guo, H., Qin, J. and Qu, Q. (CSIRO ESRE)
EFFECT OF BUOYANCY ON METHANE GAS DISTRIBUTION AND GAS CONTROL STRATEGIES AT TAILGATE REGION IN A GASSY COAL MINE Tanguturi, K., Balusu, R., Morla, R. and Khanal, M. (CSIRO CESRE)
Back to Top

Drop Breakup/Coalescence

Title Authors
MULTI-SCALE VOLUME OF FLUID MODELLING OF DROPLET COALESCENCE Mason, L.R., Stevens, G.W. and Harvie, D.J.E. (The University of Melbourne)
NUMERICAL SIMULATION OF THE COLLISION OF A DROPLET WITH A HEATED SOLID SURFACE Gumulya, M., Utikar, R.P., Pareek, V.K., Tade, M.O. and Evans, G.M. (Curtin University)
SIMULATION OF COALESCENCE, BREAK UP AND MASS TRANSFER IN GAS-LIQUID SYSTEMS BY USING MONTE CARLO AND QUADRATURE-BASED MOMENT METHODS Buffo, A., Marchisio, D.L., Vanni, M. and Renze, P. (Politecnico di Torino, ITALY)
Back to Top

Emerging Science

Title Authors
BEYOND HAMILTONIAN: CHAOTIC ADVECTION IN A THREE-DIMENSIONAL VOLUME PRESERVING FLOW Lester, D.R., Smith, L.D., Metcalfe, G. and Rudman, M. (CSIRO CMIS)
RISK STRATIFICATION OF CEREBROVASCULAR ANEURYSMS USING CFD - A REVIEW Karunanithi, K., Lee, C.J., Zhang, Y. and Qian, Y. (Macquarie Uni.)
SPH MODELLING OF WEIR FLOW THROUGH A FOUR BAY, RADIAL GATED, SUBMERGED SPILLWAY Saunders, K., Prakash, M., Cleary, P.W. and Cordell, M. (CSIRO CMIS)
Back to Top

Fluidised Beds

Title Authors
A CFD MODELLING STUDY OF MULTI-PHASE FLOW BEHAVIOUR OF BIOMASS AND BIOCHAR PARTICLES IN A BUBBLING FLUIDIZED BED Sharma, A., Pareek, V.K., Utikar, R.P., Wang, S., Yang, H. and Zhang, D. (Curtin University)
A NOVEL CIRCULATING FLUIDIZED BED TO IMPROVE FLUID-SOLIDS CONTACTING Chu, K.W. and Yu, A.B. (UNSW)
A STUDY OF CFD MODELLING ON VARIATION OF SOLID FRACTION IN A BATCH FLUIDIZED BED DRYER Srinivas, G. and Pydi Setty, Y. (National Institute of Technology, INDIA)
STABILITY OF GAS-FLUIDIZED BEDS Mandich, K.M. and Cattolica, R.J. (UCSD MAE)
Back to Top

Gas Flows

Title Authors
CFD MODELING OF 3D INDOOR GAS CONTAMINANT PLUMES FOR TESTING SEARCH ALGORITHMS FOR MOBILE ROBOT Awadalla, M.A., Lu, T.F., Tian, Z.F. and Dally, B. (The University of Adelaide)
CFD SIMULATION OF SUPERSONIC SWIRLING SEPARATION OF NATURAL GAS USING A DELTA WING Wen, C., Feng, Y.Q., Witt, P.J., Cao, X. and Yang, Y. (China University of Petroleum)
NUMERICAL STUDY OF EFFECTS OF CENTRE BODY ON PERFORMANCE OF A FAN-DISCHARGE DIFFUSER Shi, H., Tian, Z.F., Lanspeary, P. and Kelso, R.M. (The University of Adelaide)
Back to Top

Granular Flow

Title Authors
MODELLING OF GRANULAR FLOWS THROUGH INCLINED ROTATING CHUTES USING A DISCRETE PARTICLE MODEL Shirsath, S.S., Padding, J.T., Clercx, H.J.H. and Kuipers, J.A.M. (Eindhoven University of Technology)
SEGREGATION OF A MULTI-COMPONENT GRANULAR MIXTURE IN A ROTARY CLASSIFIER Pereira, G.G. and Cleary, P.W. (CSIRO CMIS)
Back to Top

Granulation and Atomisation

Title Authors
EFFECT OF FLOW AND OPERATING PARAMETERS ON THE SPREADING OF A VISCOUS LIQUID ON A SPINNING DISC Pan, Y., Witt, P.J., Kuan, B. and Xie, D. (CSIRO CPSE)
EXPERIMENTAL AND NUMERICAL MODELLING OF NASAL SPRAY ATOMISATION Fung, M.C., Inthavong, K., Yang, W. and Tu, J.Y. (RMIT University)
Back to Top

Heap Leaching

Title Authors
A CONTROL VOLUME FINITE ELEMENT SCHEME FOR ANALYSIS OF HEAP LEACHING Mostaghimi, P., Tollit, B.S., Neethling, S.J., Gorman, G.J. and Pain, C.C. (Imperial College London)
BRINE PERMEABILITY PREDICTIONS FOR SAND PACKS AND SANDSTONES USING NAVIER-STOKES EQUATIONS AND THREE-DIMENSIONAL MICRO-TOMOGRAPHY IMAGES OF PORE SPACES Ahmed, S.A. and Iglauer, S.I. (CSIRO CESRE)
SPH SIMULATION OF PACKED-BEDS AND COLUMNS APPLIED TO HEAP-LEACHING
Animation
Barker, D.J., Parameswaran, G. and Neethling, S.J. (Imperial College London)
Back to Top

Heat Transfer

Title Authors
EVALUATION OF EDDY VISCOSITY TURBULENCE MODELS TO PREDICT CONVECTIVE HEAT TRANSFER Heschl, H.C., Inthavong, K. and Tu, J.Y. (Uni. Applied Science Burgenland, AUSTRIA)
USE OF PMV CONTROL TO IMPROVE ENERGY EFFICIENCY IN COMFORT COOLING APPLICATIONS Erakovic, L.E. and Evans, B.E. (GHD)
Back to Top

Hydrometallurgy

Title Authors
ASSESSMENT OF THE FLOW PATTERN IN A SOLVENT EXTRACTION SETTLER Lane, G.L., Mohanarangam, K. and Yang, W. (CSIRO CMIS)
CFD PREDICTIONS OF SOLIDS DISTRIBUTION IN STIRRED VESSEL Kubicki, D. and Lo, S. (CD-adapco)
CFD STUDY OF THE MULTIPHASE FLOW IN CLASSIFYING HYDROCYCLONE: EFFECT OF CONE GEOMETRY Ghodrat, M., Kuang, S.B., Yu, A.B., Vince, A., Barnett, G.D. and Barnett, P.J. (UNSW)
COMPARISON OF DIFFERENT DRAG COEFFICIENT CORRELATIONS IN THE CFD MODELLING OF A LABORATORY-SCALE RUSHTON-TURBINE FLOTATION TANK Karimi, M.K., Akdogan, G.A., Dellimore, K.H. and Bradshaw, S.M. (Stellenbosch University)
COMPUTATIONAL FLUID DYNAMIC (CFD) SIMULATION OF FLUID FLOW IN A MIXER-SETTLER EXTRACTOR FOR RARE EARTH METAL SEPARATION Zou, Y., Tingting, M.A., Wang, Y., Sun, J. and Fei, W. (Tsinghua University, China)
LOCALISED INDUCEMENT OF BUBBLE SURFACE MOBILITY DUE TO MOTION OF A NEARBY PARTICLE Verrelli, D.I. (CSIRO CPSE)
NUMERICAL SIMULATION OF GAS-LIQUID FLOW IN GAS-AGITATED TANKS Song, T., Feng, Y.Q., Zhou, J. and Jiang, k. (CSIRO CMIS)
QUANTIFICATION OF NUMERICAL AND MODEL UNCERTAINTIES IN THE CFD SIMULATION OF THE GAS HOLDUP AND FLOW DYNAMICS IN A LABORATORY SCALE RUSHTON-TURBINE FLOTATION TANK Karimi, M.K., Akdogan, G.A., Dellimore, K.H. and Bradshaw, S.M. (Stellenbosch University)
SIMULATION OF SOLID-LIQUID FLOW IN STIRRED TANKS AT HIGH SOLID LOADING Wadnerkar, D., Utikar, R.P., Tade, M.O. and Pareek, V.K. (Curtin University)
Back to Top

Industrial Applications

Title Authors
CFD APPLICATIONS AT PALMER NICKEL AND COBALT REFINERY Allen, P., White, M., Haywood, R., Anderson, B., O'Farrell, R. and Hobson, R. (Hatch)
VALIDATION OF CFD MODELS USING FLOW3D FOR A SUBMERGED LIQUID JET Hasan, N. (Don Computing)
Back to Top

Lattice-Boltzmann

Title Authors
EFFECT OF A CLUSTER ON GAS-SOLID DRAG FROM LATTICE BOLTZMANN SIMULATIONS Shah, M.T., Utikar, R.P., Tade, M.O., Evans, G.M. and Pareek, V.K. (Curtin University)
IMMERSED BOUNDARY-FINITE DIFFERENCE LATTICE BOLTZMANN METHOD USING TWO RELAXATION TIMES Rojas, R., Seta, T., Hayashi, K. and Tomiyama, A. (Kobe University)
LARGE EDDY SIMULATION OF A SOLID-LIQUID FLUIDIZED BED USING THE LATTICE-BOLTZMANN METHOD AND A SOFT-SPHERE COLLISION MODEL Kroll-Rabotin, J.S., Sungkorn, R., Hashemi, S.A., Derksen, J.J. and Sanders, R.S. (University of Alberta)
Back to Top

Liquid-Particle Flows

Title Authors
FULLY RESOLVED SIMULATION OF FLOWS WITH NON-SPHERICAL PARTICLES USING AN IMMERSED BOUNDARY METHOD Kriebitzsch, S.H.L., van der Hoef, M.A. and Kuipers, J.A.M. (Eindhoven University of technology )
HIGHLY RESOLVED SIMULATIONS OF SOLIDS SUSPENSION IN A MIXING TANK Derksen, J.J. (Uni. Alberta)
Back to Top

Micro-fluidics, Bubble & Drops

Title Authors
EFFECT OF MOLECULAR WEIGHT ON CAPILLARY ABSORPTION OF POLYMER DROPLETS Pereira, G.G. and Dhondi, S. (CSIRO CMIS)
ELECTROVISCOUS FLOW THROUGH A MICROFLUIDIC T-JUNCTION Berry, J.D., Davidson, M.R. and Harvie, D.J.E. (The University of Melbourne)
FORCES ARISING DURING BUBBLE-PARTICLE INTERACTION Verrelli, D.I., Lee, A., Schwarz, M.P. and Koh, P.T.L. (CSIRO CPSE)
HISTORY FORCE AND INERTIA EFFECTS APPLIED TO SWIRLING FLOW PRODUCED WATER TREATMENT van Eijkeren, D.F. and Hoeijmakers, H.W.M. (University of Twente)
MODELLING FILM DRAINAGE OF A BUBBLE HITTING AND BOUNCING OFF A SURFACE Manica, R.M., Klaseboer, E., Gupta, R.P., Hendrix, M.H.W., Ohl, C. and Chan, D.Y.C. (Institute of High Performance Computing, SINGAPORE)
ON THE EFFECT OF LIFT FORCES IN BUBBLE COLUMNS Olsen, J.E. and Popescu, M. (SINTEF)
RISING AND BOUNCING BUBBLES AGAINST A BOUNDARY WITH BEM; THE EFFECT OF VISCOUS STRESSES Klaseboer, E., Manica, R.M. and Chan, D. (Institute of High Performance Computing, SINGAPORE)
Back to Top

Numerical Methods

Title Authors
A MULTIPHASE FLUID-SOLID MODEL BASED ON THE LEVEL SET METHOD Hilton, J.E. (CSIRO CMIS)
CHARACTERISING THE FAILURE AND REPOSE ANGLES OF IRREGULARLY SHAPED THREE-DIMENSIONAL PARTICLES USING DEM Mead, S.R., Cleary, P.W. and Robinson, G.K. (CSIRO CMIS)
COMPARISON OF SOLUTION ALGORITHM FOR FLOW AROUND A SQUARE CYLINDER Saito, Y., Soma, T., Sagawa, R., Matsushita, Y., Aoki, H., Daikoku, M., Shirota, M.P. and Inamura, T. (Tohoku University)
FLOQUET STABILITY OF TIME PERIODIC PIPE FLOW Nebauer, J.R.A. and Blackburn, H.M. (Monash University)
LINEAR INSTABILITIES ON MODEL POLAR VORTICES GENERATED IN A DIFFERENTIAL-DISK ROTATION CONFIGURATION Vo, T., Montabone, L. and Sheard, G.J. (Monash University)
TOPOLOGICAL DERIVATIVE FORMULATION FOR SHAPE SENSITIVITY IN INCOMPRESSIBLE TURBULENT FLOWS Jemcov, A. and Stephens, D.W. (University of Notre Dame)
Back to Top

Optimisation & Performance

Title Authors
APPLICATION OF DESIGN OPTIMISATION TO ESP PARTICLE CAPTURE Horgan, M. and Brown, G.J. (Alcoa World Alumina)
FORCES ON THE BODY DURING ELITE COMPETITIVE PLATFORM DIVING Harrison, S.M., Cohen, R.C.Z., Cleary, P.W., Barris, S. and Rose, G. (CSIRO CMIS)
HYDRODYNAMIC MODELLING OF A DIRECT CONTACT HEAT EXCHANGER USED FOR BIO OIL CONDENSATION PVS, K.K., Papadikis, K. and Gu, S. (Xi'an Jiao tong-Liverpool University, CHINA)
KAYAK PERFORMANCE MODELLING USING SPH Harrison, S.M., Gunn, D.F. and Cleary, P.W. (CSIRO CMIS)
OPTIMISATION OF PROCESS EQUIPMENT USING GLOBAL SURROGATE MODELS Stephens, D.W. and Fawell, P.D. (Applied CCM)
Back to Top

Particle Collisions

Title Authors
CONTACT FORCE MODELS IN INELASTIC COLLISIONS Cummins, S.J., Thornton, C. and Cleary, P.W. (CSIRO CMIS)
EULERIAN-LAGRANGIAN MODELLING WITH STOCHASTIC APPROACH FOR DROPLET-DROPLET COLLISIONS Pawar, S.K., Padding, J.T., Deen, N.G., Kuipers, J.A.M., Jongsma, A. and Innings, F. (Eindhoven University of Technology, The Netherlands)
Back to Top

Population Balance

Title Authors
CFD-PBE SIMULATION FOR AN INDUSTRIAL GRANULATION PROCESS WITH SCREENING-CRUSHING Lau, P., Li, Z., Potthoff, M. and Kind, M. (Institute of Thermal Process Engineering, Karlsruhe Institute of Technology)
COUPLED CFD-PBE SIMULATION FOR NUCLEATION AND PARTICLE GROWTH IN FLUIDIZED BED SPRAY GRANULATION Li, Z., Kessel, J., Gruenewald, G. and Kind, M. (Karlsruhe Institute of Technology)
EFFICIENT SIMULATION OF A TWO-PHASE VERTICAL PIPE FLOW WITH POPULATION BALANCE METHOD Icardi, M., Marchisio, D.L. and Labois, M. (Politecnico di Torino)
NUMERICAL STUDY OF AGGLOMERATION MODELING IN POLYDISPERSED GAS-SOLID FLOWS WITH RESPECT TO PARTICLE SEPARATION Schellander, D., Schneiderbauer, S. and Pirker, S. (CD-Laboratory on Particulate Flow Modelling)
POPULATION BALANCE MODEL FOR THE CFD SIMULATION OF ADIABATIC AND DIABATIC TWO PHASE GAS LIQUID FLOWS Krepper, E. and Lucas, D. (Helmholtz-Zentrum Dresden-Rossendorf)
STUDY OF THE DISPERSED PHASE BEHAVIOR IN A PULSED COLUMN FOR OXALATE PRECIPITATION IN AN EMULSION Amokrane, A.A., Charton, S., Lamadie, F.H., Becker, J., Klien, J.P. and Puel, F. (French Nuclear Energy Commission)
Back to Top

Pyrometallurgy

Title Authors
INFLUENCE OF COAL BLEND COMPONENT KINETICS ON ENTRAINED FLOW GASIFICATION PERFORMANCE Gartner, L.E., Grabner, M. and Meyer, B. (Freiberg Uni., GERMANY)
MODELLING CONCEPT FOR SUBMERGED ARC FURNACES Darmana, D., Olsen, J.E., Tang, K. and Ringdalen, E. (SINTEF)
MODELLING OF FLUID FLOW IN A PS CONVERTER WITH ONE AND THREE INJECTION POINTS Almaraz, A., Salas, E., Barron, M.A., Cuenca, R.C., Jaramillo, D., Reyes, F. and Plasencia, G. (CIITEC-IPN)
MODELLING THREE-PHASE FLOW IN METALLURGICAL PROCESSES Goniva, C., Wierink, H, Heiskanen, K., Kloss, C. and Pirker, S. (JKU, Linz, AUSTRIA)
SIMULATION OF PARTICLE SEGREGATION IN METALLURGICAL FURNACES FOR IRON PRODUCTION Kloss, C., Seil, P., Hauzenberger, F., Amberger, S., Feilmayr, C., Pirker, S. and Goniva, C. (JKU Linz, Austria)
THE EFFECTS OF LANCE POSITIONING AND DESIGN ON THE CO-INJECTION OF PULVERIZED COAL AND NATURAL GAS INTO BLAST FURNACES Majeski, A.J., Runstedtler, A., D'Alessio, J., MacFadyen, N. and Ferron, K. (Natural Resources Canada)
Back to Top

Subsea

Title Authors
CFD MODELLING OF A SUBSEA COOLER FOR CALCULATION OF EXTERNAL HEAT TRANSFER COEFFICIENT Leahy, M.J., Jagannatha, D., Chauvet, C. and Holbeach, J. (MSi Kenny)
CFD SIMULATIONS OF TURBODRILL PERFORMANCE WITH ASYMMETRIC STATOR AND ROTOR BLADES CONFIGURATION Mokaramian, A., Rasouli, V. and Cavanough, G. (Curtin University)
ONSET OF SLUGGING OF STAGNANT LIQUID AT A V-SHAPED ELBOW IN A PIPE-LINE: EXPERIMENT AND NUMERICAL SIMULATION Irikura, M., Maekawa, M., Hosokawa, S. and Tomiyama, A. (Graduate School of Engineering, Kobe University)
QUASI-3D MODELLING OF TWO-PHASE SLUG FLOW IN PIPES Mo, S., Ashrafian, A., Barbier, J-C and Johansen, S.T. (SINTEF Materials and Chemistry)
SLURRY TRANSPORT IN A PIPELINE - COMPARISON OF CFD AND DEM MODELS Kubicki, D. and Lo, S. (CD-adapco)
Back to Top

Thickeners

Title Authors
CFD ANALYSIS OF SHORT RETENTION TIME CLARIFIER Shelke, N.M., Mali, K.V. and Joshi, S.V. (University of Pune, INDIA.)
DIRECT SIMULATIONS OF FLOCCULATION IN SEDIMENTING SOLID-LIQUID SUSPENSIONS Derksen, J.J. (Uni. Alberta)
MODELLING THE IMPACT OF TWO DIFFERENT FLOCCULANTS ON THE PERFORMANCE OF A THICKENER FEEDWELL Tanguay, M.T., Fawell, P.D. and Adkins, S.J. (CSIRO CMIS)
VALIDATION OF TURBODIL FLOW PREDICTIONS Heath, A.R. (Outotec)
Back to Top

Turbulence and Multi-material Flows

Title Authors
COMPUTATIONAL AND EXPERIMENTAL INVESTIGATION OF THE BREAKUP MECHANISM OF BUBBLES AND DROPS IN TURBULENT FLOWS Andersson, R. and Helmi, A. (Chalmers University of Technology)
EFFECTS OF NUMERICAL TREATMENT OF VISCOUS AND SURFACE TENSION FORCES ON PREDICTED INTERFACE MOTION Hayashi, K. and Tomiyama, A. (Kobe University)
MULTIDIMENSIONAL TURBULENCE SPECTRA - STATISTICAL ANALYSIS OF TURBULENT VORTICES Ghasempour, F., Andersson, R. and Andersson, B. (Chalmers University of Technology)
NUMERICAL MODELLING OF AIR CORE IN HYDROCYCLONES Karimi, M.K., Akdogan, G.A., Bradshaw, S.M. and Mainza, A. (Stellenbosch University)
Back to Top
 
©2012 CSIRO